SM1: Open-source operating systems ASIX/DAW/DAM-1 Task A6: How to create tarball and .deb packages 08-01-24

PRACTICAL EXERCISE 4: HOW TO CREATE tarball AND  .deb PACKAGES


GENERAL CONDITIONS
1- Deadline: 21-01-2024.
2- Send your files attached to an e-mail with the following specifications:
     a) E-mail address: cf(at)collados.org or jordi.binefa(at)fje.edu depending who is your teacher
     b) Subject:
         b.1) ASIX1: asix1_surname_name_sm1act07
         b.2) DAW1: daw1_surname_name_sm1act07


BEFORE STARTING: HOW TO INSTALL AND SHARE SOFTWARE ON DEBIAN LINUX AND DERIVATIVES

a) Debian derivatives
b) Installing software via tarball files
 c) Installing software via tarball files with the help of a Makefile
d) Installing software via a .deb software package and a package manager
 e) Installing software via repository servers
<--------------------<><><><><><>-------------------->


PART I - CREATING TARBALL SOFTWARE PACKAGES


1.1- How to build a tarball software package from a program made of a single source code

Step 1) Source code development


We are going to develop a software that shows us our login name at system. Make a new directory called loginteller on your system. Change to the newly created directory. Start an instance of Geany and write the folliwing source code in C language:

/* loginteller.c
 * Based on monousuar.c at http://www.binefa.net/gnu/gcc/processos/Informacio_d_usuari.html
 * www.binefa.cat
 * 20120507
*/
#include <stdio.h>
#include <unistd.h>    // getlogin()
#include <stdlib.h>    // exit()

int main(){
    char *szLogin;
   
    if((szLogin = getlogin())==NULL){
        perror("getlogin");
        exit(EXIT_FAILURE);
    }  
    printf("Your login name at the system is : %s\n",szLogin);

    return (0);
}

In order to check if your code works properly, run the following commnads:

dacomo@inf1-dacomo:~/loginteller$ gcc  loginteller.c  -o  loginteller
dacomo@inf1-dacomo:~/loginteller$ ./loginteller

Your terminal will show you the following message:

Your login name at the system is: dacomo

Of course, the message displayed by the terminal depends on what your username is in the system.

Step 2) Creating a Makefile archive

A Makefile typically starts with some variable definitions which are then followed by a set of target entries for building specific targets (typically .o & executable files in C) or executing a set of command associated with a target label. We are going to develop a Makefile for easily:
a) Compiling and linking the source code
b) Cleaning binary files
c) Installing binary files on your system
d) Uninstalling binary files on your system

Start an instance of Geany and write the following Makefile:

############################################################################
# Makefile for building: loginteller
# 20120508 - www.binefa.cat
#############################################################################
####### Compiler, tools and options

CC              = gcc
CFLAGS          = -o
INSTALL_PROGRAM = install -m 755 -p
DEL_FILE        = rm -f
####### Files
SOURCES   = loginteller.c
DESTDIR   = /usr/local/bin
TARGET    = loginteller
####### Compilation and cleaning. Be careful, you have to write a TAB character at the beginnig of each command. Do not write whitespace characters.
loginteller:
    $(CC) $(SOURCES) $(CFLAGS) $(TARGET)
clean:
    $(DEL_FILE) $(TARGET)
####### Install and uninstall. Be careful, you have to write a TAB character at the beginnig of each command. Do not write whitespace characters.
install: $(TARGET)
    $(INSTALL_PROGRAM) $(TARGET) $(DESTDIR)
uninstall:
    $(DEL_FILE) $(DESTDIR)/$(TARGET)

 Now, you can easily:
a) Compile loginteller.c running the following command: make (or make loginteller)
b) Clean  old binaries and object files  running the following command: make clean
c) Install a binary on your system running as a sudo user the following command: make install
d) Uninstall a binary on your system running as a sudo user the following the command: make uninstall


Step3) Creating a README file

A README file is a text file that contains information for the user about the program. README files often contain instructions and additional help. Add a README file with the following content:

********************************************
*                                          *
* loginteller v1.01                        *
* Copyright (C) 2010-2021, jobima & dacomo *
*                                          *
********************************************

Welcome to the loginteller program!  This program, once installed as
/usr/local/sbin/loginteller,  tells current login name at the system.


SOURCES
=========

Web:      http://www.inf1-jobima.cat/software/utils/loginteller/
FTP:      ftp://ftp.inf1-jobima.cat/pub/utils/loginteller/loginteller.tar.gz


INSTALLATION
============

Installation of loginteller  is quite easy.   Simply follow these steps:

1. Building:

       # make loginteller

2. Installing:

       # sudo make install

3. You are finished.


REMOVAL
=======

Removal of loginteller  is quite easy as well.   Simply follow these steps:

1. Uninstalling:

       # sudo make uninstall

2. Cleaning (:

       # make clean

3. You are finished.


LICENSE
=======

The  logiteller program  is  distributed  under the  terms  of the  GNU
General Public  License.  The  copyright on this  program belongs  to Jordi
Binefa.  The actual license appears in file /usr/share/common-license/GPL.

Even though  the GNU General Public  License does NOT require  you to send
your modifications back to the author,  it is considered "good form" to do
so,  as this  allows your  modifications  to be  incorporated into  future
versions of the program, allowing others to benefit from them.


FEEDBACK
========

Your comments, suggestions, corrections and enhancements are always warmly
welcomed!  Please send these to:

E-mail:   jobima@inf1-jobima.cat


Step 4) Creating a .tar.gz file

Run the following command:

dacomo@inf1-dacomo:~/loginteller$ tar cfz loginteller-1.01.tar.gz loginteller.c Makefile README



1.2- How to build a tarball software package from a program made of  multiple source code

Step 1) Source code development
We are going to develop a software that shows us our login name and UID at system. Make a new project directory called loginteller2 on your system. Change to the newly created directory. Start an instance of Geany and write the following source codes in C language:

// login.c
// login.c gets the user's login username
// jobima & dacomo
// 20230509

#include <stdio.h>
#include <unistd.h> // getlogin()
#include <stdlib.h> // exit()

void showLogin(){
    char *szLogin;

    if((szLogin = getlogin())==NULL){
        perror("getlogin");
        exit(EXIT_FAILURE);
    }
    printf("Your login name at the system is : %s\n",szLogin);
}

----------------------------------------------------------------------
// Program name: uid.c
// uid.c gets the user's UID number
// Authors: jobima & dacomo
// Date: 20230509

#include <stdio.h>
#include <unistd.h> // getuid()

void showUID(){
    int iUID;

    iUID = getuid();
    printf("Your UID number at the system is : %i\n",iUID);
}

----------------------------------------------------------------------

// Header name: loginteller2.h
// Header required for loginteller2.c
// Authors: jobima & dacomo
// Date: 20230509

#ifndef LOGINTELLER2_H
#define LOGINTELLER2_H
void showLogin();
void showUID();
#endif

------------------------------------------------------------------------

// Program name: loginteller2.c
// Authors: jobima & dacomo
// loginteller shows the user's login name and UID number
// Date: 20230509

#include "loginteller2.h"

int main(){
    showLogin();
    showUID();

    return 0;
}

Step 2) Creating a Makefile archive

Start an instance of Geany and write the following Makefile:

############################################################################
# Makefile for building: loginteller2
# jobima and dacomo
# 20230509
############################################################################
#
####### Compiler
CC              = gcc
####### Compiler options
CFLAGS          = -Wall -c
LFLAGS          = -Wall -o
####### Installing and uninstalling programs and options
INSTALL_PROGRAM = install -p -m 755
DEL_PROGRAM     = rm -f
####### Files and directories
SOURCES   = loginteller2.c login.c uid.c
DEPS      = loginteller2.h
OBJECTS   = loginteller2.o login.o uid.o
DESTDIR   = /usr/bin
TARGET    = loginteller2
####### Compilation, linking and installing. Be careful, you have to write a TAB character at the beginnig of each command. Do not write whitespace characters.
%.o: %.c $(DEPS) $(SOURCES)
        $(CC) $(CFLAGS) $(SOURCES)
loginteller2:$(OBJECTS)
        $(CC) $(OBJECTS) $(LFLAGS) $(TARGET)
install:$(TARGET)
        $(INSTALL_PROGRAM) $(TARGET) $(DESTDIR)
####### Uninstalling and cleaning. Be careful, you have to write a TAB character at the beginnig of each command. Do not write whitespace characters.clean:
clean:$(TARGET) $(OBJECTS)
        $(DEL_PROGRAM) $(TARGET) $(OBJECTS)
uninstall:
        $(DEL_PROGRAM) $(DESTDIR)/$(TARGET)

Now, you can easily:
a) Compile and link your source codes running the following command: make loginteller2
c) Install a binary on your system running as a sudo user the following command: sudo make install
b) Clean  old binaries files  running the following command: make clean
d) Uninstall a binary on your system running as a sudo user the following the command: sudo make uninstall


Step3) Creating a README file

A README file is a text file that contains information for the user about the program. README files often contain instructions and additional help. Add a README file with the following content:

********************************************
*                                          *
* loginteller2 v1.01                       *
* Copyright (C) 2010-2023, XXXXXXX         *
*                                          *
********************************************

Welcome to the loginteller2 program!  This program, once installed as
/usr/local/bin/loginteller2,  tells current uid and login name at the system.


SOURCES
=========

Web:      http://www.fjeclot.cat/software/utils/loginteller2/
FTP:      ftp://ftp.fjeclot.cat/pub/utils/loginteller2.tar.gz


INSTALLATION
============

Installation of loginteller2  is quite easy.   Simply follow these steps:

1. Building:

       # make loginteller2

2. Installing:

       # sudo make install

3. You are finished.


REMOVAL AND CLEANING
====================

Removal and cleaning of loginteller2  is quite easy as well.   Simply follow these steps:

1. Uninstalling:

       # sudo make uninstall

2. Cleaning :

       # make clean

3. You are finished.


LICENSE
=======

The  loginteller2 program  is  distributed  under the  terms  of the  GNU
General Public  License.  The  copyright on this  program belongs  to XXX
YYY.  The actual license appears in file /usr/share/common-license/GPL.

Even though  the GNU General Public  License does NOT require  you to send
your modifications back to the author,  it is considered "good form" to do
so,  as this  allows your  modifications  to be  incorporated into  future
versions of the program, allowing others to benefit from them.


FEEDBACK
========

Your comments, suggestions, corrections and enhancements are always warmly
welcomed!  Please send these to:

E-mail:   feedback@fjeclot.cat


Step 4) Creating a .tar.gz file

Run the following command:

dacomo@inf1-dacomo:~/loginteller2$ tar cfz loginteller2-1.01.tar.gz loginteller2.c login.c uid.c loginteller2.h README Makefile


<--------------------<><><><><><>-------------------->



PART II - CREATING .DEB PACKAGES


2.1- Installing checkinstall

In order to build a .deb package you need an application called checkintall installed on your system. In ordre to install checkintall run the following commands:

dacomo@inf1-dacomo:~$ sudo aptitude update
dacomo@inf1-dacomo:~$ sudo aptitude install checkinstall

But If  If your system tells you that it couldn't find a package called checkinstall then add the following line to /etc/apt/sources.list:

deb http://deb.debian.org/debian buster-backports main

and run again:

dacomo@inf1-dacomo:~$ sudo aptitude update
dacomo@inf1-dacomo:~$ sudo aptitude install checkinstall


2.2- How to build a .deb software package from a program made of a single source code

We are going to create a .deb software package for the programa called loginteller.c that we developed in section 1.1 following these steps:

a) Check if Makefile exists. If it does not exist then you have to create it. Remember: Makefile and loginteller.c have to be stored in the same directory.

b) If you had installed a previous version of loginteller from a tarball package then,  remove any  binary running make clean and uninstall the software running make uninstall.

c) Run checkinstall:

dacomo@inf1-dacomo:~/loginteller$ checkinstall --install=no --deldesc=yes --backup=no

checkinstall 1.6.3, Copyright 2010 Felipe Eduardo Sanchez Diaz Duran
           This software is released under the GNU GPL.


The package documentation directory ./doc-pak does not exist.
Should I create a default set of package docs?  [y]: n

Please write a description for the package.
End your description with an empty line or EOF.
>> It tells current login name at the system
>>

*****************************************
**** Debian package creation selected ***
*****************************************

This package will be built according to these values:

0 -  Maintainer: [ dacomo@inf1-dacomo ]
1 -  Summary: [ It tells current login name at the system ]
2 -  Name:    [ loginteller ]
3 -  Version: [ 20200414 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ checkinstall ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ loginteller ]
9 -  Alternate source location: [  ]
10 - Requires: [  ]
11 - Recommends: [ ]
12 - Suggests: [ ]
 13 - Provides: [ loginteller ]
14 - Conflicts: [  ]
15 - Replaces: [  ]
Enter a number to change any of them or press ENTER to continue: 0
Enter the maintainer's name and e-mail address:
>> dacomo@inf1-dacomo  (NOTE: dacomo must be change into your user name)

This package will be built according to these values:

0 -  Maintainer: [ dacomo@inf1-dacomo.fjeclot.net ]
1 -  Summary: [ It tells current login name at the system ]
2 -  Name:    [ loginteller ]
3 -  Version: [ 20210513 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ checkinstall ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ loginteller ]
9 -  Alternate source location: [  ]
10 - Requires: [  ]
11 - Recommends: [ ]
12 - Suggests: [ ]
 13 - Provides: [ loginteller ]
14 - Conflicts: [  ]
15 - Replaces: [  ]

Enter a number to change any of them or press ENTER to continue: 3
Enter new version:
>> 0.1

This package will be built according to these values:

0 -  Maintainer: [ dacomo@inf1-dacomo.fjeclot.net ]
1 -  Summary: [ It tells current login name at the system ]
2 -  Name:    [ loginteller ]
3 -  Version: [ 1.01 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ checkinstall ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ loginteller ]
9 -  Alternate source location: [  ]
10 - Requires: [  ]
11 - Recommends: [ ]
12 - Suggests: [ ]
 13 - Provides: [ loginteller ]
14 - Conflicts: [  ]
15 - Replaces: [  ]

Enter a number to change any of them or press ENTER to continue: 6
Enter the new software group:
>> utilities

This package will be built according to these values:

0 -  Maintainer: [ dacomo@inf1-dacomo.fjeclot.net ]
1 -  Summary: [ It tells current login name at the system ]
2 -  Name:    [ loginteller ]
3 -  Version: [ 1.01 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ utilities ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ loginteller ]
9 -  Alternate source location: [  ]
10 - Requires: [  ]
11 - Recommends: [ ]
12 - Suggests: [ ]
 13 - Provides: [ loginteller ]
14 - Conflicts: [  ]
15 - Replaces: [  ]

Enter a number to change any of them or press ENTER to continue:

Installing with make install...

========================= Installation results ===========================
gcc loginteller.c -o loginteller
install -m 755 -p loginteller /usr/local/bin

======================== Installation successful ==========================

Copying files to the temporary directory...OK

Stripping ELF binaries and libraries...OK

Compressing man pages...OK

Building file list...OK

Building Debian package...OK

NOTE: The package will not be installed

Erasing temporary files...OK

Deleting temp dir...OK


*********************************************************************

 Done. The new package has been installed and saved to

 /home/dacomo/loginteller/loginteller_1.01-1_amd64.deb
 You can install it in your system anytime using:

      dpkg -i loginteller_1.01-1_amd64.deb

**********************************************************************

d)  At this moment a new .deb package loginteller_1.01-1_amd.64.deb has been build in your working directory. Run the following command:

dacomo@inf1-dacomo:~/loginteller$ ls

and your terminal will show you the following files:

loginteller  loginteller_1.01-1_amd64.deb loginteller.c Makefile

e) Install loginteller_1.01-1_amd64.deb running:

dacomo@inf1-dacomo:~/loginteller$ sudo dpkg -i loginteller_1.01-1_amd64.deb
[sudo] password for dacomo:
Selecting previously unselected package loginteller.
(Reading database ... 300676 files and directories currently installed.)
Preparing to unpack loginteller_1.01-1_amd64.deb ...
Unpacking loginteller (1.01-1) ...
Setting up loginteller (1.01-1) ...

Afterwards, run the following command:

dacomo@inf1-dacomo:~/loginteller$ aptitude search loginteller

and your terminal will show the following message:

i    loginteller                - It tells current login name at the system

e) Run the following command:

dacomo@inf1-dacomo:~/loginteller$ aptitude show loginteller

and your terminal will show you the following message:

Package: loginteller
Version: 1.01-1
New: yes
State: installed
Automatically installed: no
Priority: extra
Section: utilities
Maintainer: dacomo@inf1-dacomo.fjeclot.net
Architecture: amd64
Uncompressed Size: 36.9 k
Description: It tells current login name at the system

f) If you want to remove loginteller from your system run the following command: sudo  dpkg  -r  loginteller 
Reading database ... 300678 files and directories currently installed.)
Removing loginteller (1.01-1) ...
dpkg: warning: while removing loginteller, directory '/usr/local/bin' not empty so not removed (NOTE:  Do not worry about any warning message) 

g) If you want to install loginteller through the terminal run again:  sudo  dpkg  -i  loginteller_1.01-1_amd64.deb

jihuh

2.3- How to build a .deb software package from a program made of a multiple source code


We are going to create a .deb software package for the programa called loginteller2.c that we developed in section 1.2 following these steps:

a) Run checkinstall:

dacomo@inf1-dacomo:~/loginteller2$ checkinstall --install=no --deldesc=yes --deldoc=yes --delspec=no -d 0 --backup=no

checkinstall 1.6.3, Copyright 2010 Felipe Eduardo Sanchez Diaz Duran
           This software is released under the GNU GPL.


The package documentation directory ./doc-pak does not exist.
Should I create a default set of package docs?  [y]: y

Please write a description for the package.
End your description with an empty line or EOF.
>> It tells current login name and UID number at the system
>>

*****************************************
**** Debian package creation selected ***
*****************************************

This package will be built according to these values:

0 -  Maintainer: [ dacomo@inf1-dacomo ]
1 -  Summary: [ It tells current login name and UID number at the system ]
2 -  Name:    [ loginteller2 ]
3 -  Version: [ 20230509 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ checkinstall ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ loginteller ]
9 -  Alternate source location: [  ]
10 - Requires: [  ]
11 - Recommends: [ ]
12 - Suggests: [ ]
 13 - Provides: [ loginteller ]
14 - Conflicts: [  ]
15 - Replaces: [  ]
Enter a number to change any of them or press ENTER to continue: 3
Enter new version:
>> 1.01

This package will be built according to these values:

0 -  Maintainer: [ dacomo@inf1-dacomo ]
1 -  Summary: [ It tells current login name and UID number at the system ]
2 -  Name:    [ loginteller ]
3 -  Version: [ 1.01 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ checkinstall ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ loginteller ]
9 -  Alternate source location: [  ]
10 - Requires: [  ]
11 - Recommends: [ ]
12 - Suggests: [ ]
 13 - Provides: [ loginteller ]
14 - Conflicts: [  ]
15 - Replaces: [  ]

Enter a number to change any of them or press ENTER to continue: 6
Enter the new software group:
>> utilities

This package will be built according to these values:

0 -  Maintainer: [ dacomo@inf1-dacomo ]
1 -  Summary: [ It tells current login name and UID number at the system ]
2 -  Name:    [ loginteller ]
3 -  Version: [ 1.01 ]
4 -  Release: [ 1 ]
5 -  License: [ GPL ]
6 -  Group:   [ utilities ]
7 -  Architecture: [ amd64 ]
8 -  Source location: [ loginteller ]
9 -  Alternate source location: [  ]
10 - Requires: [  ]
11 - Recommends: [ ]
12 - Suggests: [ ]
 13 - Provides: [ loginteller ]
14 - Conflicts: [  ]
15 - Replaces: [  ]

Enter a number to change any of them or press ENTER to continue:

Installing with make install...

========================= Installation results ===========================
gcc -Wall -c loginteller2.c login.c uid.c
gcc loginteller2.c login.c uid.c -Wall -o loginteller2
install -p -m 755 loginteller2 /usr/bin

======================== Installation successful ==========================

Copying documentation directory...
./
./README
chown: changing ownership of '/var/tmp/tmp.FehxWLeUDX/package//usr/share/doc/loginteller2/README': Operation not permitted
chown: changing ownership of '/var/tmp/tmp.FehxWLeUDX/package//usr/share/doc/loginteller2': Operation not permitted

Copying files to the temporary directory...OK

Stripping ELF binaries and libraries...OK

Compressing man pages...OK

Building file list...OK

Building Debian package...OK

NOTE: The package will not be installed

Erasing temporary files...OK

Deleting doc-pak directory...OK

Deleting temp dir...OK


**********************************************************************

 Done. The new package has been saved to

 /home/dacomo/m01tu3p4/loginteller2/loginteller2_1.01-1_amd64.deb
 You can install it in your system anytime using:

      dpkg -i loginteller2_1.01-1_amd64.deb

**********************************************************************


d)  At this moment a new .deb package loginteller2_1.01-1_amd.64.deb has been build in your working directory. Run the following command:

dacomo@inf1-dacomo:~/loginteller2$ ls

and your terminal will show you the following files:

login.c  login.o  loginteller2  loginteller2_1.01-1_amd64.deb  loginteller2.c  loginteller2.h  loginteller2.o  Makefile  README  uid.c  uid.o

e) Install loginteller2_1.01-1_amd64.deb running:

dacomo@inf1-dacomo:~/loginteller2$ sudo dpkg -i loginteller2_1.01-1_amd64.deb
[sudo] password for dacomo:
Selecting previously unselected package loginteller2.
(Reading database ... 238295 files and directories currently installed.)
Preparing to unpack loginteller2_1.01-1_amd64.deb ...
Unpacking loginteller2 (1.01-1) ...
Setting up loginteller2 (1.01-1)

 Afterwards, run the following command:

dacomo@inf1-dacomo:~/loginteller2$ aptitude search loginteller2

and your terminal will show the following message:

i    loginteller                - It tells current login name and UID number at the system

e) Run the following command:

dacomo@inf1-dacomo:~/loginteller2$ aptitude show loginteller2

and your terminal will show you the following message:

Package: loginteller2
Version: 1.01-1
New: yes
State: installed
Automatically installed: no
Priority: extra
Section: utilities
Maintainer: dacomo@inf1-dacomo
Architecture: amd64
Uncompressed Size: 49.2 k
Description: It tells current login name and UID number at the system

f) Check that your README has been copied at /usr/share/doc/loginteller2 directory.


g) If you want to check if your program works run:

dacomo@inf1-dacomo:~/loginteller2$ loginteller2

and your terminal will show you the following message:

Your login name at the system is: dacomo
Your UID number at the system is: 1000

g) Finally, if you want to remove loginteller2 from your system run the following command:
dacomo@inf1-dacomo:~/loginteller2$ sudo  dpkg  -r  loginteller2
[sudo] password for dacomo:
(Reading database ... 238298 files and directories currently installed.)
Removing loginteller2 (1.01-1) ...


<--------------------<><><><><><>-------------------->
PRACTICAL EXERCISE

1- Download the following source code: http://www.collados.org/asix1/sm1/userinfo.c. Create:
     a) A Makefile to compile, clean, install (on /usr/local/bin) and uninstall userinfo on your system.
     b) A README  file with information about  version (2.07), release (4), authors (write your personal information), a small explanation, sources, compiling, installing, removal, license and feedback.
     c) Build a .deb package called userinfo_2.07-4_amd64.deb with userinfo.c and the Makefile archive created in the previous question. Write your personal information in Maintener of the checkinstall form.

2- Download the following source code: http://www.collados.org/asix1/sm1/triangle.c. Create:
     a) A Makefile to compile, clean, install (on /usr/local/bin) and uninstall triangle on your system.
     b) A README  file with information about  version (6.28), release (2), authors (write your personal information), a small explanation, sources, compiling, installing, removal, license and feedback.
     c) Build a .deb package called triangle_6.28-2_amd64.deb with triangle.c and the Makefile archive created in the previous question. Write your personal information in  Maintainer of checkinstall form

3- Download the following source code: http://www.collados.org/asix1/sm1/netshow.tar.gz. Create:
     a) A Makefile to compile, clean, install (on /usr/bin)  and uninstall netshow on your system.
     b) A README  file with information about  version (1.04), release (4), authors (write your personal information), a small explanation, sources, compiling, installing, removal, license and feedback.
     c) Build a .deb package called netshow_1.04-4_amd64.deb with the files .c, .h and the Makefile archive created in the previous question. Write your personal information in  Maintainer of checkinstall form

4- Save and send: loginteller_1.01-1_amd64.deb, loginteller2_1.01-1_amd64.deb, userinfo_2.07-4_amd64.deb,  triangle_6.28-2_amd64.deb and netshow_1.04-4_amd64.deb